spec

DP sensor and display (standard)

Resolving power
Display range
Sensor range
Excess pressure on sensors
Display precision
*1

0.1 Pa
±2500 Pa
±1000 Pa
±2000 Pa
5 MPa
±2.5% of rdg ±1Pa、However 50Pa following ± 2Pa

Test Pressure Sensor and Display

Display precision

±1% of F.S. ±1 digit (linearity, hysteresis, reproducibility)

Temperature properties

±0.1% of F.S. / °C

Display units *2

Test Pressure:

kPa, MPa (PSI, kg/cm2, bar, mbar, mmHg, cmHg, inHg)

Leak volume

Pa, kPa, mL/s, mL/min, L/min, Pa?m3/s, E-3 Pa?m3/s, Pa/s, Pa/min,(mmH2O, inH2O, mmHg, in3/min, in3/d, , ft3/h)

Leak volume display

3 to 5 digits (floating point), sample rate: 10/second

Leak limit (standard)

±999.9Pa or less

Number of Channels

32ch（0～31）

Timer setting range

999.9 seconds (resolving power: 0.1 second)

Power Source

AC100 to 240V±10%, 50/60Hz, 80VAmax
Fuse (T2.5A 250V)
Dielectric strength and resistance AC1400V 10 sec, DC500V 50MΩ
Internal solenoid power supply:  DC24V

Test pressure source

Uses clean air.The original pressure must be sufficiently higher than the test pressure.

Pilot pressure source

Applies 400 to 700kPa of clean air.

CPU

ARM9 400MHz, DRAM 128MB

LCD/TP

5.7 inch color LED 640 x 480 pixels (VGA)

Pipe connection diameter

Rc(PT) 1/4 test pressure supply, pilot air supply, workpiece piping, master piping

Ambient temperature

Operating temperature  5 to 45°C  Storage temperature:  -20 to 60°C

Consult if using in a high temperature environment.

Humidity

80 %RH or less  No dew condensation

Mass

Approx. 14kg (standard specifications)

Serial communications RS232C-based
(D-sub9-pin)
2 port

I/F fixed length output

Leak data and set values are outputted simultaneously

ID/F fixed length output Standard settings

Leak data and set values are outputted simultaneously

T/F fixed length output

Only leak data outputted

Other formats

USB Port

Saving data

Saves decisions, leak values, correction values, test pressure, WK#, CH#,  and time on inserted memory.(Automatic file creation every 24 hours)

Set values storage

All channel settings, system settings, etc.

LAN Port

Intend to include FTP server function

Maintenance/calibration port

M10 x 1.5 (O-ring seal)

Electro-pneumatic regulator

Repeatability:  ±0.5% of F.S. and belowTemperature properties:  ±0.16% of F.S./°C

Control I/O connector, caps (2) for RS-232C, USB cover, test report, traceability documents, user manual

Ambient properties (IEC 6101-1)

Overvoltage category II

Protection class I

Peripherals

Master chamber, leak master, bypass unit, external exhaust valve, etc.